Cisco Systems WSC3750X24TS specifications Removing Screws from the Switch, page, 2-12

Chapter 2 Switch Installation

Installing the Switch

To install the switch in a 19-inch or 24-inch rack (24-inch racks require optional mounting hardware), follow the instructions described in these procedures:

•Removing Screws from the Switch, page 2-12

•Attaching Brackets to the Catalyst 3750G-24TS Switch, page 2-14

•Attaching Brackets to the Catalyst 3750G Integrated Wireless LAN Controller Switches, page 2-17

•Attaching Brackets to All Other Catalyst 3750 Switches, page 2-18

•Mounting the Switch in a Rack, page 2-24

•Attaching the Cable Guide, page 2-26

Note When you install the switch in a 24-inch rack, an optional bracket kit that is not included with the switch is required. You can order a kit containing the 24-inch rack-mounting brackets and hardware from Cisco. For the Catalyst 3750G-24TS switches, order part number RCKMNT-3550-1.5RU=. For the other Catalyst 3750 switches, order part number RCKMNT-1RU=.

The Catalyst 3750G-24WS-S25 and the 3750G-24WS-S50 switches do not support 24-inch rack-mounting.

Removing Screws from the Switch

If you plan to install the switch in a rack, you must first remove the screws in the switch chassis so that you can attached the mounting brackets.

•Figure 2-9, Figure 2-10, and Figure 2-11show how to remove the chassis screws in a 1-rack-unit (RU) switch.

•Figure 2-12shows how to remove the chassis screws in a 1.5-RU switch.

•Figure 2-13shows how to remove the chassis screws in a 2-RU switch.

Figure 2-9 Removing Screws from the Catalyst 3750-24TS, 3750G-24T, 3750-24PS, 3750-48PS, 3750G-16TD, and 3750-48TS Switches

16	17	18
			19	20
					21	22
							23	24

23X

Catalyst

3750 SERIES

86819

24X

1 2

Catalyst 3750 Switch Hardware Installation Guide

2-12 OL-6336-07