Chapter 2 Switch Installation

Figure 2-58 Connecting to a XENPAK Module Port

Catalyst

 

3750

series

 

1

TX

RX

 

1

Where to Go Next

104575

1

SC connector

Step 6 If necessary, reconfigure and restart the switch or target device.

Where to Go Next

If the default configuration is satisfactory, the switch needs no further configuration. You can use any of these management options to change the default configuration:

Start the device manager, which is in the switch memory, to manage individual and standalone switches. This is an easy-to-use web interface that offers quick configuration and monitoring. You can access the device manager from anywhere in your network through a web browser.

For more information, see the device manager online help.

Start the Network Assistant application, which is described in the Getting Started with Cisco Network Assistant guide. Through this GUI, you can configure and monitor a switch cluster or an individual switch.

Use the CLI to configure the switch as a member of a cluster or as an individual switch from the console. See the Catalyst 3750 Switch Command Reference on Cisco.com for information on using the CLI with a Catalyst 3750 switch.

Start an SNMP application such as the CiscoView application.

Catalyst 3750 Switch Hardware Installation Guide

 

OL-6336-07

2-45

 

 

 

Page 83
Image 83
Cisco Systems WSC3750X24TS specifications Where to Go Next, Connecting to a Xenpak Module Port