Cisco Systems WSC3750X24TS specifications Taking Out What You Need

Appendix D Configuring the Switch with the CLI-Based Setup Program

Taking Out What You Need

Taking Out What You Need

Remove the items shown in Figure D-1from the shipping container:

Figure D-1 The Catalyst 3750 Switch, Adapter Cable, AC Power Cord, and the StackWise Cable

1

2

3

4

SYST

RPS

MASTR

STAT

DUPLX

SPEED

STACK

MODE

1	2	3	4
			5	6	7	8
						9	10	11	12

13	14	15	16	17	18
						19	20	21	22
										23	24

Catalyst 3750

			90533
1	Catalyst 3750 switch	3	AC power cord
2	RJ-45-to-DB-9 adapter cable	4	StackWise cable (optional)

Note For a DC switch, you will have a DC power supply terminal block.

You need to provide the Category 5 or later straight-through cables to connect the switch ports to other Ethernet devices.

You can use the mdix auto interface configuration command in the CLI to enable the automatic medium-dependent interface crossover (auto-MDIX) feature. When the auto-MDIX feature is enabled, the switch detects the required cable type for copper Ethernet connections and configures the interfaces accordingly. Therefore, you can use either a crossover or a straight-through cable for connections to a copper 10/100, 10/100/1000, or 1000BASE-T SFP module port on the switch, regardless of the type of device on the other end of the connection.

The auto-MDIX feature is enabled by default on switches running Cisco IOS Release 12.2(18)SE or later. For releases between Cisco IOS Release 12.1(14)EA1 and 12.2(18)SE, the auto-MDIX feature is disabled by default. For configuration information for this feature, see the switch software configuration guide or the switch command reference.

Catalyst 3750 Switch Hardware Installation Guide

OL-6336-07 D-3