Cisco Systems WSC3750X24TS specifications Torque to 15 lbf-in, Figure C-2 Crimping the Ground Lug

Appendix C Connecting to DC Power

Connecting to DC Power

Step 4 Using a Panduit crimping tool, crimp the ground lug to the 6-gauge wire, as shown in Figure C-2.

Figure C-2 Crimping the Ground Lug

60529

Step 5 Use the two number-10-32 screws to attach the ground lug and wire assembly to the switch rear panel ground connector, as shown in Figure C-3.

Step 6 Using a ratcheting torque screwdriver, torque each ground-lug screw to 15 lbf-in. (240 ozf-in.)

Use either the front ground connector or the rear ground connector. You cannot use both at the same time.

Figure C-3 Torquing Ground-Lug Screws

STACK 1 STACK 2

CONSOLE

36	- 72V
3.0 -
	1.5A
	B –
	+
	A –
	+

1

1

Torque to 15 lbf-in.

132635

Catalyst 3750 Switch Hardware Installation Guide

OL-6336-07 C-3