Cisco Systems WSC3750X24TS specifications Figure C-8 Torquing the Terminal-Block Captive Screws

Appendix C Connecting to DC Power

Connecting to DC Power

Step 6 Use a ratcheting torque screwdriver to torque the terminal block captive screw (above the installed wire lead) to 4.5 lbf-in. (72 ozf-in.), as shown in Figure C-8.

Caution Do not overtorque the terminal-block captive screws. The recommended maximum torque is 4.5 lbf-in. (72 ozf-in.)

Figure C-8 Torquing the Terminal-Block Captive Screws

Torque to 4.5 lbf-in. (72 ozf-in.)

60533

Step 7 Repeat Steps 4 and 5 for the remaining three DC-input power source wires. Figure C-9shows the completed wiring of a terminal block plug.

Figure C-9 Completed Wiring of Terminal Block Plug

Return	Feed A
Negative
Return	Feed B
Negative

60534

Catalyst 3750 Switch Hardware Installation Guide

OL-6336-07 C-7