Cisco Systems WSC3750X24TS specifications Port Mode, Port LED Color, Meaning, 1-19

Models: WSC3750X24TS

1 144
Download 144 pages 14.95 Kb
Page 29
Image 29
Meaning of LED Colors in Different Modes on the Switch

Chapter 1 Product Overview

10/100 and 10/100/1000 Ports

To select or change a mode, press the Mode button until the desired mode is highlighted. When you change port modes, the meanings of the port LED colors also change. Table 1-6explains how to interpret the port LED colors in different port modes.

Table 1-6

Meaning of LED Colors in Different Modes on the Switch

 

 

 

 

 

 

Port Mode

 

Port LED Color

Meaning

 

 

 

 

 

 

 

PoE1

 

Off

 

PoE is off. If the powered device is receiving power from an AC

 

 

 

 

 

power source, the port LED is off even if the powered device is

 

 

 

 

 

connected to the switch port.

 

 

 

 

 

 

 

 

 

Green

 

PoE is on. The port LED is green only when the switch port is

 

 

 

 

 

providing power.

 

 

 

 

 

 

 

 

 

Alternating

 

PoE is denied because providing power to the powered device will

 

 

 

green and

 

exceed the 370 W switch power capacity.

 

 

 

amber

 

 

 

 

 

 

 

 

 

 

 

 

Blinking amber

PoE is off due to a fault.

 

 

 

 

 

 

 

 

 

 

 

 

 

Caution PoE faults are caused when noncompliant cabling or

 

 

 

 

 

 

 

powered devices are connected to a PoE port. Only

 

 

 

 

 

 

 

standard-compliant cabling can be used to connect Cisco

 

 

 

 

 

 

 

pre-standard IP Phones and wireless access points or

 

 

 

 

 

 

 

IEEE 802.3af-compliant devices to PoE ports. A cable or

 

 

 

 

 

 

 

device that causes a PoE fault must be removed from the

 

 

 

 

 

 

 

network.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Amber

 

PoE for the port has been disabled.

 

 

 

 

 

Note PoE is enabled by default.

 

 

 

 

 

 

 

STAT

 

Off

 

No link, or port was administratively shut down.

 

(port status)

 

 

 

 

 

 

 

 

Green

 

Link present.

 

 

 

 

 

 

 

 

 

 

 

 

 

Flashing green

 

Activity. Port is sending or receiving data.

 

 

 

 

 

 

 

 

 

Alternating

 

Link fault. Error frames can affect connectivity, and errors such as

 

 

 

green-amber

 

excessive collisions, cyclic redundancy check (CRC) errors, and

 

 

 

 

 

alignment and jabber errors are monitored for a link-fault

 

 

 

 

 

indication.

 

 

 

 

 

 

 

 

 

Amber

 

Port is blocked by Spanning Tree Protocol (STP) and is not

 

 

 

 

 

forwarding data.

 

 

 

 

 

Note After a port is reconfigured, the port LED can remain amber

 

 

 

 

 

 

for up to 30 seconds as STP checks the switch for possible

 

 

 

 

 

 

loops.

 

 

 

 

 

 

 

 

Flashing amber

Port is blocked by STP and is sending and receiving packets.

 

 

 

 

 

 

 

DUPLX

 

Off

 

Port is operating in half duplex.

 

(duplex)

 

 

 

 

 

 

 

 

Green

Port is operating in full duplex.

 

 

 

 

 

 

 

 

 

 

 

 

Catalyst 3750 Switch Hardware Installation Guide

 

OL-6336-07

1-19

 

 

 

Page 29
Image 29
Cisco Systems WSC3750X24TS specifications Port Mode, Port LED Color, Meaning, 1-19