Extron electronic manual Command, DVS 304 Series • SIS Communication and Control

Command	ASCII Command	Response	Additional Description
	(host to scaler)	(scaler to host)
On Screen Display (OSD) duration
Select speed	20*X9*#	Dur X9* ]	Set the OSD duration
View speed	20#	X9* ]	View the on screen display time.
Text label (OSD) (Input 4 only)
Write name	E X8$NI]	Nam 4X8$}	Write text X8$ for input 4.
Read name	ENI]	X8$}	View text label for input 4
PIP size
PIP size	16*X10%#	Pmd X10%]	Select size of PIP window.
View	16#	X10%]	View PIP window size.
PIP mode

PIP on	17*X10)#	Pip X10)]
PIP off	17*0#	Pip 0]
View	17#	X10)]

Turn PIP mode on with PIP window from input X10).

Turn PIP mode off.

View selection status (on or off).

NOTE: When PIP is active, all controls apply to the PIP window. The main window cannot be modified while PIP window is displayed.

Swap (when PIP mode is “On”)

% Tke0] Swap content between main and PIP window.

PIP mode audio follow (audio model only)

Set	19*X10^#	Aud X10^]	Select audio follow setting in PIP mode.
View	19#	X10^]	View audio follow status.
General information
	I/i	Vid X7! • Aud X7! • Typ X7#• Std X8!• Pre X8! X8! X8! • Sdi X7!]
Query firmware version
	Q/q	x.xx]	View the firmware version.
Query part number
	N/n	60-1027-01/-02	View the part number.
		/-03/-04]
View internal temperature
	20S	X8@]	View internal temp. in degrees Celsius.
NOTE: X7! = Input selection		1 to 4
	X7# = Input video format	1 to 9 (see page 35)
	X8! = Input standard	0 = none, 1 = NTSC 3.58, 2 = PAL, 3 = NTSC 4.43, 4 = SECAM, - = RGB or YUVp/HDTV
	X8@ = Internal temperature (in degrees Celsius)
	X8$ = Text label/preset name	Up to 16 characters
	X9* = OSD display setup:	0 to 5 seconds in 1 second steps
	X10) = PIP window input selection	0 to 4

X10% = PIP window size X10^ = PIP audio setup

1= 1/4, 2 = 1/9, 3 = 1/16, 4 = 1/25, 5 = side by side normal, 6 = side by side full screen 1 = follow main, 2= follow PIP, 3 = toggle

DVS 304 Series • SIS Communication and Control 43