Command | ASCII (Telnet) | URL Encoded (Web) | Response | Additional description |
| (host to processor) | (host to processor) | (processor to host) |
|
Set Direct Access port map 24 Reset Direct Access port map 24 Disable Direct Access port map 24 Read Direct Access port map 24
E{port #}MD} | W{port #}MD | Pmd{port #}] |
E2001MD} | W2001MD | Pmt02001] |
E0MD} | W0MD | Pmd00000] |
EMD} | WMD | {port #}] |
DVS 304 Series • SIS Communication and Control
Listing connections
Get connection listing | E CC } | WCC | (See below.) |
Remote client IP address: port number, time/date when connection was made, total connection time ]
Remote client IP address: port number, time/date when connection was made, total connection time ]
Remote client IP address: port number, time/date when connection was made, total connection time ]
...
Total clients • connections available ]]
Unit Web responses: HTML sample code var connections = new Array ();
connections [1] = ‘Client IP1, timedate 1, uptime 1’; connections [2] = ‘Client IP2, timedate 2, uptime 2’; connections [3] = ‘Client IP3, timedate 3, uptime 3’;
...
connections [n] = ‘Client IPn, timedate n, uptime n’; connections [n + 1] = ‘total clients, connections available’;
NOTE: X2@ = Verbose/Response Mode (Default = 0 for Telnet connections; 1 for
and tagged responses for queries. If tagged responses is enabled, all read commands will return the constant string + the data, like setting the value does (for example command: Esc CN
} response: Ipn• x12]).
X5@ = Connection’s security level: 0 = anonymous, 1 – 10=extended security levels 1 thru 10, 11 = user, 12 = administrator.
51
