Extron electronic manual this female, BNC connector, DVS 304 Series • Cabling

DVideo input 1: Composite video — Connect a composite video signal to

this female, BNC connector. 1

EOptional SDI (serial digital interface) input connector — Connect an

SDI signal to this female BNC connector. During setup, the SDI input can be assigned to one of the other unused inputs.

FVideo input 2: Composite/S-video/Component — Connect composite video, S-video, and component video signals. Connect cables for the appropriate signal type, as shown here.

Composite Video				S-video (YC)		Component Video (Y, R-Y, B-Y)
	Y	B-Y		Y	B-Y		Y	B-Y
	/VID	/C		/VID	/C		/VID	/C
2	R-Y		2	R-Y		2	R-Y

VID

SDI

Figure 3. Input 2 Connector Cabling

G Video input 3: S-video — Connect an S-video signal to this 4-pin, mini-DIN	3	YC
female connector.

HVideo input 4: RGB/R-Y, Y, B-Y/YC/VID — Connect RGBHV, RGBS, RGsB, RGBcvS, YUVi, YUVp/HDTV, S-video and composite video through this 15-pin HD connector. See pin configurations below.

NOTE: DVS 304 DVI models feature EDID emulation on this 15-pin HD connector.

Signal		Input 4 Configuration				3 2
	Pin 1	Pin 2	Pin 3	Pin 13	Pin 14	1
RGBHV	R	G	B	H	V
RGBS	R	G	B	S	14	13
RGBcvS	R	G	B	S
RGsB	R	Gs	B
YUV	R-Y	Y	B-Y
S-video		Y	C
Video		Vid

Figure 4. Input 4 Pinout Table

NOTE: Equipment following the SCART interconnection standard may be connected to the RGBcvS input cabling configuration.

DVS 304 Series • Cabling 6