DVS
SIS Command and Response Table for IP Control Port
Command | ASCII (Telnet) | URL Encoded (Web) | Response | Additional description |
| (host to processor) | (host to processor) | (processor to host) |
|
Ethernet data port
Set current connection | E0 *X6( TC} | W 0 %2A X6( TC | Pti 0 * X6( ] |
port timeout |
|
|
|
View current connection | E0TC } | W 0TC | X6( ] |
port timeout |
|
|
|
Set global IP port timeout | E1 * X6( TC } | W 1%2AX6(TC | Pti1 * X6( ] |
View global IP port | E1TC } | W 1TC | X6( ] |
timeout |
|
|
|
|
|
|
|
Firmware version requests |
|
|
|
NOTE: An asterisk (*) after the version number indicates the version currently running. Caret (^) indicates bad checksum/invalid load. Question marks (?) indicate version not
loaded.
Query firmware version | Q or 1Q | Q or 1Q | X1! ] | Show the processor’s firmware version |
number (X1!) to two decimal places. Gives the number of the currently running version of the
304 Series • SIS Communication and Control
Query verbose version | 0Q | 0Q | All responses |
information |
|
| from |
Example: | 1Q | 1Q | 1.01 |
Query bootstrap version | 2Q | 2Q | X1! ] |
Example: | 2Q | 2Q | 0.06 |
Query factory firmware | 3Q | 3Q | X1!(plus web ver.- |
version |
|
| |
Example: | 3Q | 3Q | |
|
|
| Series |
|
|
| 2005 03:28:10 GMT) |
Show bootstrap,
The bootstrap firmware is not user- replaceable but you may need this information for troubleshooting.
In this example, the factory firmware version is 1.00, (the kernel version 1.37), for the DVS 304, dated 12 August, 2005.
NOTE: X1! | = Version number (listed to 2 decimal places) |
X6( | = The number of seconds before timeout on the IP connection: (min = 1; max = 65000; default = 30 = 300 seconds) |
45