•Input 4 Presets/OSD — The specific settings for size, centering, contrast, brightness, detail, zoom, and input configuration for input 4 can be saved to a preset. Up to 128 input presets can be saved. A saved preset can be recalled as desired.
Select a preset number and click Save or Recall as applicable.
NOTE: Saving to an existing preset overwrites the prior saved data with the new.
In addition this section enables the OSD text to be set for input 4.
The
•Video Mute — Select this to mute or unmute the video image. When selected, the button text turns red.
•Freeze — Select this to freeze an image for use as a logo or for annotation.
•Auto Image — Select this to perform an auto image on an input.
•Volume % (DVS 304 A only) — This slider allows the user to adjust the volume percentage for each input.
I/O Configuration Tab
The I/O Configuration tab allows input and output configuration, as well as EDID emulation settings to be adjusted.
Figure 38. The I/O Configuration Tab Window
•Input Config — Set a suitable video type for an input by clicking on the
NTSC and 2:2 film detection for PAL video sources is relevant. Audio levels for each input can be set via the up and down arrows.
•Auto Image — Auto Image can be enabled or disabled for all inputs.
•SDI Field Flip — This control allows the swapping of odd and even lines of the SDI fields. It is disabled if the currently selected input is not in SDI format.
DVS 304 Series • SPPCP | 63 |
