Extron electronic DVS 304 manual Help menu, Process Running

Figure 35. Process Running

5.When the file upload is complete (after file verification and the device restarting), click on the X at top right, or on File > Exit to exit the

Firmware Loader. The SPPCP window restores itself.

6.Connection the DVS 304 must be reestablished since the connection is lost during firmware upload. Open the SPPCP Connect dialog box and re-enter the connection information to re-establish communication with the DVS 304.

Help menu

Click on this to open a drop-down menu displaying five selectable options: Contents,

Extron Home Page, Check for Updates, Unit Info..., and About....

•Contents — Select this (or press F1) to bring up the Help file which gives step-by-step instructions to configure the DVS 304 using the SPPCP program. The Help File opens a separate window. Select the subject matter from the contents section at the left side of the window.

Figure 36. The Control Program’ Help File’s Main Window

•Extron Home Page — Selecting this opens the Extron Web site (www.extron.com) home page. From this link, device firmware and necessary applications such as Firmware Loader and IP Link File Manager can be downloaded, and supporting documentation for Extron products can be viewed.

•Check For Updates — Select this to update the software control program (SPPCP). If an update is available follow any on-screen instructions to install it. A dialog box appears if no updates are currently available. Click OK

or the X in the window’s top right corner to close it.

•Unit Info... — Selecting this opens a dialog box with information about the connected device. The box shows the part number, the name, model description, currently installed firmware version and build, and the device’s internal temperature.

•About... — Select this for details (version/build number, for example) of the SPPCP.

DVS 304 Series • SPPCP 61