When cutting the workpiece which has the dimension of “*” there might be some possibility of the lower end of the circular saw to touch with the workpiece, even if the motor head is located at the lower limit position. Pay attention when cutting the workpiece. For further details, refer to “PRACTICAL APPLICATIONS” on page 18. Mount the auxiliary board on the fence surface (Refer ( ) the thickness of auxiliary board). Refer to "5. Cutting large workpieces" on page 20 (Fig. 28).
STANDARD ACCESSORIES
1 262mm (10") TCT | 2 Dust bag (1 piece) | 4 10mm BOX wrench |
Saw blade (1 piece) |
| (1 piece) |
3 Vise Assembly w/knob | 5 Collar |
bolt (1 piece) | Outside Dia. 25.4mm (1") |
| (1 piece) |
| Outside Dia. 30mm |
| (1 piece) (Only model 240V) |
For how to use, refer to | For how to use, refer to |
page 18. | page 29. |
Fig. 3
OPTIONAL ACCESSORIES...sold separately
1Extension Holder and Stopper
2Saw blade 255mm (10") TCT Saw blade (Total teeth:72)
3 Sub Fence (A)
4 Crown molding Vise Ass’y (Include Crown molding Stopper (L)) 5 Crown molding Stopper (L)
6 Crown molding Stopper (R)
NOTE: Accessories are subject to change without any obligation on the part of the HITACHI.
APPLICATIONS
Wood and aluminum sash.
7