| Model | Grass Trimmer | Brush Cutter | Grass Trimmer | Brush Cutter | ||
| CG24EAS (SL) | CG24EAS (S) | CG27EAS (SL) | CG27EAS (S) | |||
|
| ||||||
Engine Size (ml) |
| 23.9 |
|
| 26.9 |
|
|
Spark Plug |
|
| NGK BMR7A or equivalent |
|
| ||
Fuel Tank Capacity (l) |
|
|
|
| 0.52 |
|
|
Dry Weight (kg) |
| 4.6 |
| 4.9 | 4.9 |
| 5.1 |
Sound pressure level | Equivalent |
|
|
|
|
|
|
LpA (dB (A)) | 92 | 92 | 93 | 93 | 93 | 95 | |
(EN27917) |
| ||||||
Measured sound | (ISO10884) |
|
|
|
|
|
|
power level LwA | Equivalent | 105 | 105 | 105 | 107 | 107 | 107 |
(dB (A)) |
| ||||||
Measured sound | (2000/14/EC) |
|
|
|
|
|
|
power level LwA | Racing | 108 | 108 | 108 | 110 | 110 | 110 |
(dB (A)) |
| ||||||
Guaranteed sound | (2000/14/EC) |
|
|
|
|
|
|
power level LwA | Racing | 111 | 111 | 111 | 111 | 111 | 111 |
(dB (A)) |
| ||||||
Vibration level (m/s2) |
|
|
|
|
|
|
|
(ISO7916) |
|
|
|
|
|
|
|
Equivalent (Front / Left handle) | 6.2 | 3.7 | 8.4 | 6.2 | 4.8 | 8.6 | |
Equivalent (Rear / Right handle) | 5.8 | 4.7 | 6.5 | 7.4 | 4.0 | 6.1 | |
Idling (Front / Left handle) | 4.2 | 2.6 | 2.6 | 3.1 | 2.8 | 2.8 | |
Idling (Rear / Right handle) | 3.1 | 4.4 | 4.4 | 2.0 | 3.9 | 3.9 | |
Racing (Front / Left handle) | 7.7 | 4.6 | 11.6 | 8.3 | 6.2 | 11.9 | |
Racing (Rear / Right handle) | 7.6 | 5.0 | 8.2 | 10.4 | 4.1 | 7.6 | |
NOTE
Equivalent noise level/vibration level are calculated as the
* All data subject to change without notice.
ASSEMBLY PROCEDURES | 1 |
Drive shaft to engine (Fig. 1) |
|
Loosen tube locking bolt (1) about ten turns so that the bolt point will | 2 |
not obstruct drive shaft tube to be inserted. When inserting drive | |
shaft tube, hold the tube locking bolt outward preventing inside |
|
fitting from obstructing as well. |
|
Insert the drive shaft into the clutch case of the engine properly until |
|
the marked position (2) on the drive shaft tube meets the clutch | Fig. 1 |
case. | |
Some models may come with the drive shaft already installed. |
|
6