English

2.Set the orbital position to “0”

NOTE: When cutting use cutting fluid (oil base cutting fluid) to prolong the blade’s service life.

SELECTION OF BLADES

○Accessory blades

To ensure maximum operating efficiency and results, it is very important to select the appropriate blade best suited to the type and thickness of the material to be cut. Three types of blades are provided as standard accessories. The blade number is engraved in the vicinity of the mounting portion of each blade. Select appropriate blades by referring to Table 1 (page 14).

HOUSING THE ALLEN WRENCH

○It is possible to house the axiliary allen wrench on the base (see Fig. 15).

CONNECTING WITH CLEANER

By connecting with cleaner (sold separately) through dust collection adapter and adapter (sold separately), most of dust can be collected.

(1) Remove the allen wrench from the base.

(2) Move the base fully forward. (Fig. 9, 10)

(3) Connect the dust collection adapter with adapter. (Fig. 16)

(4) Connect the adapter with the nose of cleaner. (Fig. 16)

(5) Insert dust collection adapter into the rear hole of the base until the hook catches in the notch. (Fig. 17)

(6) Press the hook to remove the dust collection adapter.

I Allen wrench

II

Base

Fig. 15

Adapter

 

 

Nose

Base

Dust collection

Cleaner

 

 

adapter

 

 

Fig. 16

 

Notch Hook

 

 

 

Nose

BaseRear

 

hole

Dust

 

 

collection Adapter

 

adapter

 

 

Fig. 17

 

12