g)Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.

Use of the power tool for operations different from those intended could result in a hazardous situation.

5)Service

a)Have your power tool serviced by a qualified repair person using only identical replacement parts.

This will ensure that the safety of the power tool is maintained.

SPECIFIC SAFETY RULES AND SYMBOLS

1.Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord.

Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live”and could give the operator an electric shock.

2.Use clamps or another practical way to secure and support the workpiece to a stable platform.

Holding the work by hand or against your body leaves it unstable and may lead to loss of control.

3.Always wear ear protectors when using the tool for extended periods.

Prolonged exposure to high intensity noise can cause hearing loss.

4.Handle the blades very carefully.

5.Check the blade carefully for cracks or damage before operation. Replace cracked or damaged bit immediately.

6.Avoid cutting nails. Inspect for and remove all nails from the workpiece before operation.

7.Hold the tool firmly.

8.Keep hands away from moving parts.

9.Do not touch the blade immediately after operation: it may be extremely hot and could burn your skin.

10.Always wear eye protection that meets the requirement of the latest revision of ANSI Standard Z87.1.

English

11.This Jig Saw employs a high-power motor. If the machine is used continuously at low speed, an extra load is appplied to the motor which can result in motor seizure. Always operate the power tool so that the blade is not caught by the workpiece during operation. Always adjust the blade speed to enable smooth cutting.

12.Definitions for symbols used on this tool

V...........volts Hz ........hertz

A ..........amperes

..........no load speed W .........watt

.........Class II Construction

---/min ..revolutions or reciprocation per minute

.........Alternating current

DOUBLE INSULATION FOR SAFER OPERATION

To ensure safer operation of this power tool, HITACHI has adopted a double insulation design. “Double insulation” means that two physically separated insulation systems have been used to insulate the electrically conductive materials connected to the power supply from the outer frame handled by the operator. Therefore, either the symbol “ ” or the words “Double insulation” appear on the power tool or on the nameplate.

Although this system has no external grounding, you must still follow the normal electrical safety precautions given in this Instruction Manual, including not using the power tool in wet environments.

To keep the double insulation system effective, follow these precautions:

○ Only Hitachi Authorized Service Center should disassemble or assemble this power tool, and only genuine HITACHI replacement parts should be installed.

○ Clean the exterior of the power tool only with a soft cloth moistened with soapy water, and dry thoroughly.

Never use solvents, gasoline or thinners on plastic components; otherwise the plastic may dissolve.

5