Hitachi CP-RS55 Power on/off, Turning on the power

Power on/off

Power on/off

Turning on the power

WARNING ►When the power is on, a strong light is emitted. Do not look into the lens or vents of the projector.

NOTE • Turn the power on in right order. Please power on the projector before the connected devices.

VIDEO	RGB SEARCH
ASPECT	AUTO BLANK
MAGNIFY		VOLUME
ON		VOLUME
OFF		MUTE
FREEZE		KEYSTONE
	-	ZOOM +
POSITION		MENU
	ENTER
ESC		RESET

	LAMP	POWER indicator
	TEMP	POWER indicator
	TEMP
	POWER
	INPUT
	STANDBY/ON
	button
	MENU	Power switch
	STANDBY/ON	Power switch
	STANDBY/ON

1. Make sure that the power cord is ﬁrmly and correctly connected to the projector and outlet.

2. Open the lens cover, and set the power switch to the ON position.

The power indicator will light to solid orange. Then wait several seconds because buttons may not function for these several seconds.

POWER

(Solid orange)

3. Press the STANDBY/ON button on the projector or remote control.

The projector lamp will light up and the POWER indicator will begin blinking green. When the power is completely on, the indicator will stop blinking and light green.

POWER

(Blinking green)

POWER (Solid green)

To display the picture, select an input signal according to the section "Selecting an input signal" (18).

16

Contents

About this manual Contents Projector features About contentsof package Part names Projector Controls Remote control Preparations Fastening the lens cover Putting batteries Using the remote control About the ﬁlter cover for bottom-upuse Settingup Arrangement Adjusting the projector's elevator Connecting your devices Examples of connection with a computer Examples of connection with a VCR/DVD player Connecting power supply Power on/off Turning on the power Turning off the power Operating Adjusting the volume Temporarily muting the sound Selecting an input signal Searching an input signal Selecting an aspect ratio Adjusting the zoom (magnifying power) Adjusting the focus Using the automatic adjustment feature Adjusting the position Correcting the keystone distortions Using the partial magnify feature Freezing the screen Temporarily blanking the screen Multifunctionalsettings Using the menu function (2)Main of Advanced MENU Main → one of Advanced Menus (ex. SETUP menu) (3) Advanced Menu (Main) → EASY MENU 3. To choose the target item (1) At EASY MENU (ex. KEYSTONE) (2) At Advanced Menu (ex. KEYSTONE) Page EASY MENU EASY MENU (continued) PICTUREmenu PICTURE menu (continued) Page IMAGEmenu IMAGE menu (continued) INPUTmenu INPUT menu (continued) SETUP menu SCREEN menu SCREEN menu (continued) below Page OPTION menu OPTION menu (continued) Page Maintenance Lamp WARNING Lamp (continued) DT00701 If the projector is mounted on the ceiling, or if the lamp has broken, also ask the dealer to replace the lamp In the case of replacement by yourself Air ﬁlter Air ﬁlter (continued) =NJ20922 Other care Related messages Related messages (continued) The internal portion temperature is rising A note of precaution when cleaning the air ﬁlter Regarding the indicator lamps Regarding the indicator lamps (continued) The cooling fan is not operating There is a possibility that the interior portion has become heated has become overcooled Phenomena that may easily be mistaken for machine defects The electrical power cord is not plugged in The power switch is not set to the on position of these has not been properly ﬁxed Phenomena that may easily be mistaken for machine defects (continued) The lens cover is closed The signal cables are not correctly connected and play monitor Color settings are not correctly adjusted Warranty and after-service Speciﬁcations NOTE • This speciﬁcations are subject to change without notice