Hitachi CP-RS55 Using the automatic adjustment feature, Adjusting the position, Correcting the keystone distortions,  At a RGB signal, At a video signal

Operating

Using the automatic adjustment feature

1. Press the AUTO button on the remote control.	- +	ASPECT	AUTO BLANK
		VIDEO	RGB SEARCH

 At a RGB signal	MAGNIFY	VOLUME
 At a RGB signal		VOLUME
	ON

The vertical position, the horizontal position, the clock phase and horizontal size will be automatically adjusted.

Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting.

At a video signal

The video format best suited for the respective input signal will be selected automatically.

This function is available only when the AUTO mode is selected to the item VIDEO FORMAT of INPUT menu (32). For a component video signal, the signal type is identiﬁed automatically, independently of this function.

●The automatic adjustment operation requires approximately 10 seconds. Also please note that it may not function correctly with some input.

Adjusting the position

Press the POSITION button on the remote control.	POSITION	MENU
1. The “POSITION” indication will appear on the screen.		- ZOOM +
1. The “POSITION” indication will appear on the screen.	-	ENTER
Use the cursor buttons ▲/▼/◄/► to adjust the picture
2. position.

When you want to reset the operation, press the RESET button on the remote control during the operation.

To complete this operation, press the POSITION button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

●When this function is performed at a video signal, a certain extra such as a line may appear outside a picture.

Correcting the keystone distortions

1.	Press the KEYSTONE button on the remote control.	MAGNIFY	VOLUME
1.	A dialog will appear on the screen to aid you in correcting	OFF	MUTE
		ON
the distortion.		FREEZE	KEYSTONE
2.		- +
2.	Use the cursor buttons ▲/▼ to correct the distortion.		- ZOOM +

To close the dialog and complete this operation, press

the KEYSTONE button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

●This function may not be work well with some input.

●The adjustable range for correcting will vary among inputs.