OPERATIONS (continued)

No Signal Menu

The same adjustments and settings are available with the Image and Options menus when the MENU button is pressed during display of the “NO INPUT IS DETECTED ON ***” or “SYNC IS OUT OF RANGE ON ***” message while no signal is received.Select an item with the and buttons, and start or stop operation with the and buttons.

VOLUME BLANK

START UP MIRROR MENU COLOR LANGUAGE AUTO OFF SYNC ON G WHISPER IR REMOTE

16

Table 8. No Signal Menu

Item

 

 

Description

 

 

 

 

 

 

 

 

 

Reduce

Increase

 

 

VOLUME

• When this function is used, audio input is automatically switched to video. The audio input can

be switched by moving the DISK PAD left and right during the display of the volume adjustment

 

 

bar. The volume adjustment bar is displayed by pressing VOLUME

/

button.

 

 

 

Select Blank Screen: Select the screen in case of the BLANK mode with the /

 

button. The selected one (MyScreen, ORIGINAL or one colors) is displayed when the

BLANK

BLANK mode is ON.

 

 

MyScreen is a mode that the customer-customized screen is displayed. This is the

 

blue screen at the factory setting. Refer to the description of MyScreen below.

 

ORIGINAL is a mode that the factory fixed screen is displayed.

 

When MyScreen or ORIGINAL is selected, the screen is going to the black after several minutes.

 

Select Start Up Screen: Select the screen in case of no signal input with the / button.

 

The selected one (MyScreen, ORIGINAL or TURN OFF) is displayed when no signal is input.

START UP

My Screen is a mode that the customer-customized screen is displayed. This is the

blue screen at the factory setting. Refer to the description of MyScreen below.

 

ORIGINAL is a mode that the factory fixed screen is displayed.

 

 

TURN OFF displays the blue screen.

 

 

 

• When MyScreen or ORIGINAL is selected, the screen is going to the black after several minutes.

 

 

 

 

MIRROR

Select Mirror Status: Select the mirror status with the

/

button.

MENU COLOR Select Menu Background Color: Select the color with the / button.

LANGUAGE Select Menu Display Language: Select the language with the / button.

AUTO OFF

Set AUTO OFF: Set 1~99 minutes with the / button. The system automatically enters the standby mode when a signal is not received for the set time.

Clear AUTO OFF: Select the STOP (0 min.) with the button. When the STOP is selected the system does not enter the standby mode even if no signal is received.

SYNC ON G Valid: Select the TURN ON with the button.

SYNC ON G Invalid: Select the TURN OFF with the button.

SYNC ON G

• May not be displayed correctly with some input signals when the SYNC ON G is valid. In such

 

cases, remove the signal connector so that no signal is received, set the SYNC ON G to invalid,

 

and reconnect the signal.

 

 

 

 

 

 

 

 

 

 

 

 

 

WHISPER

Set / Crear WHISPER Mode: Press the

/

button. When the WHISPER is

selected, the WHISPER mode is active. In the WHISPER mode, acoustic moise level

 

from the unit is reduced, and brightness level on screen is a little lower.

 

 

 

 

 

 

 

Select Remote Control Sensor: Select the sensors to activate along the menu with

 

the

/

button. Use this function if the remote does not work stably. The ambient

 

light may affect the remote.

 

 

IR REMOTE

 

 

VOLUME

 

 

 

 

 

 

 

 

BLANK

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

START UP

1

 

 

 

 

 

 

 

 

MIRROR

 

 

 

 

 

 

 

 

1 2 3

 

 

 

 

 

 

 

MENU COLOR

 

 

 

: active

 

 

 

 

 

AUTO OFF

 

 

 

 

 

 

 

 

LANGUAGE

 

 

 

: inactive

 

 

 

 

 

 

 

 

 

 

 

SYNC ON G

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WHISPER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IR REMOTE

 

 

 

 

 

 

ENGLISH-16

Downloaded from www.Manualslib.com manuals search engine

Page 17
Image 17
Hitachi CP-S420WA/CP-X430WA/CP-X430W, CP-S420/CP-X430 user manual No Signal Menu Description, Reduce Increase