Basic operations (continued)
To turn off the power
3
2
1 | 1 | STANDBY/ON | MUTE |
|
|
| |
|
| FREEZE |
|
STANDBY/ON |
| MAGNIFY VOLUME | |
|
| OFF |
|
| INPUT |
|
|
MUTE |
| POSITION ON | LASER |
MENU
RESET
RESET | RIGHT |
MENU ON | MOUSE ON |
BLANK | TIMER |
RGB | VIDEO |
| INPUT |
1 | Press the STANDBY/ON button, for 1 second. | ||
• The ON indicator blinks orange and the lamp turns off. (About 1 minute later), the fan stops and | |||
| the indicator lights up orange. | ||
| • Press the STANDBY/ON button for short time (less than 1 second), the projector do not set in | ||
| standby mode. | ||
|
| ||
2 | Turn the MAIN POWER switch of the projector off.[ : OFF] | ||
|
| ||
3 | Install the lens cap. | ||
|
|
| |
Caution | • To reduce temperature inside the projector, fan will rotate for about 1 minute after the lamp | ||
is turned off. | |||
|
|
•Do not turn off the MAIN POWER switch during the lamp on because the lamp is damaged.
PLUG&PLAY
This projector complies with VESA DDC1/2B specifications. PLUG&PLAY is a system with computer, peripherals (including projectors), and operating system.
It works when the projector is connected to DDC (Display Data Channel) ready computer that is running an operating system software that incorporates plug & play functionality.
(Only RGB 1)
14
Downloaded from www.Manualslib.com manuals search engine