Operating (continued)
Selecting The Aspect Ratio
1 | Press the Aspect button to toggle between the modes for |
aspect ratio. |
LASER INDICATOR
STANDBY/ON VIDEO RGB
+ + +
LENS SHIFT FOCUS ZOOM
– – –
BLANK ASPECT LASER
ASPECT button
NORMAL 
4:3 
16:9 
REAL
memo NORMAL keeps the original aspect ratio of the input signal.
■For a video signal / no signal4:3 
16:9 
SMALL 
REAL
PREVIOUSNEXT
MOUSE
ESC MENU
POSITION RESET AUTO
MAGNFY PinP VOLUME ON
FREEZE MUTE OFF
KEYSTONE SEARCH
1 2 3
ID CHANGE
memo For a HDTV signal of 1125i(1080i) or 750p(720p), only 16:9 and REAL can be selected. REAL cannot be selected when there is no input signal.
Using The Automatic Adjustment Feature
memo The automatic adjustment operation requires approximately 10 seconds. Also, please note that it may not function correctly with some input.
Press the AUTO button.
1 ■ For an RGB signalThe Vertical position, the horizontal position, the clock phase and horizontal size will be automatically adjusted. And the aspect ratio will be automatically selected. memo Make sure that the application window is set to its maximum size prior to attempting to use this feature. Dark pictures may still be incorrectly adjusted. Use a bright screen when adjusting.
LASER INDICATOR
STANDBY/ON VIDEO RGB
+ + +
LENS SHIFT FOCUS ZOOM
– – –
BLANK ASPECT LASER
PREVIOUSNEXT
MOUSE
AUTO button
ESC MENU
The signal type mode best suited for the respective input signal will be selected automatically.
This function is available only when the AUTO is selected to the item VIDEO of the INPUT menu. For a component video signal, the signal type is identified automatically independently of this function.
POSITION RESET AUTO
MAGNFY PinP VOLUME ON
FREEZE MUTE OFF
KEYSTONE SEARCH
1 2 3
ID CHANGE
The vertical position and horizontal position will be automatically adjusted.
■For a component video signalThe aspect ratio will be automatically selected.
The clock phase will be automatically adjusted.
17