Troubleshooting (continued)

Related Messages (continued)

Message

Description

 

 

REMINDER

The time the filter timer has counted has reached the

*** HRS PASSED AFTER THE LAST

FILTER CHECK.

interval time set by the "FILER MESSAGE" of

"SERVICE" item in the OPTION menu.

FILTER MAINTENANCE IS

Please clear or change the air filter by referring to the section

ESSENTIAL TO REMOVE WARNING

MESSAGE, RESET FILTER TIMER.

“Air Filter”. After caring for the air filter, please be sure to reset

SEE MANUAL FURTHER INFO.

the filter timer.

 

 

 

PLEASE CHECK THAT THE

The internal portion temperature is rising.

Please turn the power OFF, and allow the unit to cool down at

FILTER HAS BEEN CLEANED.

least 20 minutes. After the projector has sufficiently cooled

FAILURE TO CLEAN MAY

down, please make confirmation of the following items, and

RESULT IN DAMAGE TO THE

then turn the power on again.

PROJECTOR.

• Is there blockage of the air passage aperture?

SEE MANUAL FURTHER INFO.

• Is the air filter dirty?

• Does the peripheral temperature exceed 35°C?

 

 

 

NO INPUT IS DETECTED

There is no input signal.

Please confirm the signal input connection, and the status of the

ON ***

signal source.

 

 

 

 

The horizontal or vertical wavelength of the inputted

SYNC IS OUT OF RANGE

signal is outside of the response parameters of this

unit.

ON *** fH *****kHz fV *****Hz

Please confirm the specs for this unit or the signal source

 

 

specs.

 

 

42