Hitachi CP-X305, CP-X205 user manual Projector Management using Snmp, 61036HWWLQJV

3URMHFWRU0DQDJH HQWXVLQJ6103

Projector Management using SNMP

The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or warning status, from the computer on the network. The SNMP management software will be required on the computer to use this function.

NOTE • It is recommended that SNMP functions be carried out by a network administrator.

•SNMP management software must be installed on the computer to monitor the projector via SNMP.

61036HWWLQJV

&RQ¿JXUHWKHIROORZLQJLWHPVYLDDZHEEURZVHUWRXVH6103

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter "http://192.168.1.10/" into the address bar of the web browser.

(QWHUWKH$GPLQLVWUDWRU,'DQGSDVVZRUGDQGFOLFN[Logon].

&OLFN[Port Settings] on the main menu.

4)Click the [Enable] check box to open the SNMP Port.

Set the IP address to send the SNMP trap to when a Failure/Warning occurs.

NOTE ‡$1HWZRUN5HVWDUWLVUHTXLUHGDIWHUWKHSNMP PortFRQ¿JXUDWLRQ settings have been changed. Click [Network Restart]DQGFRQ¿JXUHWKH following items.

&OLFN[Security Settings] on the main menu.

&OLFN[SNMP] and set the Community Name on the screen that is displayed.

NOTE ‡$1HWZRUN5HVWDUWLVUHTXLUHGDIWHUWKHCommunity Name has been changed. Click [Network Restart]DQGFRQ¿JXUHWKHIROORZLQJLWHPV

&RQ¿JXUHWKHVHWWLQJVIRU7UDSWUDQVPLVVLRQRI)DLOXUHV:DUQLQJV&OLFN [Alert Settings] on the main menu and select the Failure/Warning item to be FRQ¿JXUHG

8) Click the [Enable] check box to send out the SNMP trap for Failures/Warnings. Clear the [Enable] check box when SNMP trap transmission is not required.

&OLFNWKH[Apply] button to save the settings.