Hitachi CP-X275 Setting UP the Projector, Angle Adjustment, Press the foot adjuster button

SETTING UP THE PROJECTOR

CAUTION • Install the projector in a suitable environment according to instructions of the accompanying manual “SAFETY INSTRUCTIONS” and this manual.

•If you press the elevator buttons without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet.

Angle Adjustment

Use the foot adjusters on the bottom of the projector to adjust the projection angle. It is variable within 0˚ to 10˚ approximately.

Lift up the front side of the

1 projector, and pressing the foot adjuster button, adjust the projection angle

Press the foot adjuster button

Release the button to lock at the

2 desired angle

3	Make the rear foot adjuster screw to
	adjust the left-right slope

Rear Foot Adjuster

6