![](/images/new-backgrounds/1176203/17620331x1.webp)
Selecting an Input Signal
5
Using the remote control
If selecting RGB input
Press the RGB button
Press this button to toggle between the devices connected to RGB IN 1 and 2. As illustrated below, each time you press the RGB button, the projector switches between RGB IN 1 and 2. Select the signal you wish to project.
RGB
RGB IN 1 RGB IN 2
If selecting video input Press the VIDEO button
Press this button to toggle between the devices connected to VIDEO IN, S- VIDEO IN and COMPONENT VIDEO. As illustrated below, each time you press the VIDEO button, the projector switches between VIDEO IN,
VIDEO | VIDEO IN | |
|
Using the projector's control panel
Press the INPUT button
As illustrated below, each time you press the INPUT button, the projector switches between its input signal ports. Select the signal you wish to project.
INPUT
RGB IN 1 RGB IN 2
VIDEO IN
COMPONENT VIDEO
| COMPONENT VIDEO |
6 | Use the zoom ring to adjust the |
| screen size |
7 Use the focus ring to focus the picture
15