Hitachi CP-X430 user manual Normal menu Single menu, Menu Display Start/Stop Press the Menu button

01CP-S420/CP-X430 03.9.2 0:08 PM ページ 11

OPERATIONS (continued)

Items indicated by (*) may be used from the control panel.

Table 3. Basic Operation (continued)

Item	Description
VOLUME	Volume Adjustment : Press the VOLUME / button.
MUTE	Set/Clear Mute Mode : Press the MUTE button. No sound is heard in the
	MUTE mode.
	Automatic Adjustment at RGB Input : Press the AUTO button. Horizontal
	position(H.POSIT), vertical position (V.POSIT),clock phase (H.PHASE),
	and horizontal size(H.SIZE) are automatically adjusted. Use with the
AUTO	window at maximum size in the application display.
	Automatic Adjustment at Video Input : Press the AUTO button. A signal
	type appropriate for the input signal is selected automatically. Valid only
	when AUTO is set for VIDEO on the menu.
	• This operation requires approximately 10 seconds. It may not function correctly
	with some input signals.
BLANK	Set/Clear Blank Mode: Press the BLANK button. No image is displayed in
ON/OFF	the Blank mode. The screen color is as set in BLANK on the Image menu.
MENU	Menu Display Start/Stop: Press the MENU button.
	• The menu display is terminated automatically after approximately 10 seconds of
ON/OFF (*)
	inactivity.

Select Menu Type: Press the MENU SELECT button. Allows the user to select the normal menu or the single menu. Only the selected item is displayed on the single menu, and other items are displayed with the

and buttons as with the normal menu.

•Valid only when the Setup menu is used. Push the MENU SELECT button after selecting items such as "BRIGHTNESS".

MENU	• The MENU SELECT button may operate as the mouse control button. Refer to
SELECT
	page 4.
	Normal menu					Single menu
					(MENU SELECT)
		SETUP INPUT IMAGE OPT.
		BRIGHT	0
		CONTRAST		-2
		V POSIT	100
		H POSIT	100
		H PHASE		+1
		H SIZE	800
		COLOR BAL R		0
		COLOR BAL B		0
		ASPECT				CONTRAST	-2
P.IN P.	Select Mode of P.IN P. Display : Press the PinP button.
	Small → Large → P.IN P. off ( → Small)
MODE
	• P.IN P. function superimposes a video image over RGB or DVI signals.

Set / Clear KEYSTONE Mode (*) : Press the KEYSTONE button.

Select KEYSTONE Mode : Press the / button in the KEYSTONE

mode. Vertical ↔ Horizontal

KEYSTONE Adjust KEYSTONE : Press the / button.

•The image may not be appeared properly when this function is activated on same input signals.

•The adjustable range of distortion correction will be different among input signals.

ENGLISH

ENGLISH-11