Multifunctional settings
OPTION Menu
With the OPTION menu, the items shown in the table below can be performed.
Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it referring to the following table.
MENU [RGB] | :SELECT |
PICTURE | AUTO SEARCH TURN OFF |
IMAGE | AUTO OFF 0 |
INPUT | LAMP TIME 0 |
SETUP | FILTER TIME 0 |
SCREEN | SERVICE |
OPTION |
|
EASY MENU |
|
Item
AUTO SEARCH
AUTO OFF
LAMP TIME
FILTER TIME
Description
Using the buttons ▲/▼ turns on/off the automatic signal search function.
TURN ON TURN OFF
This function works with INPUT, RGB, and VIDEO buttons. When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order. The search is started from the current port. Then when an input is found, the projector will stop searching and display the image.
RGB IN1 RGB IN2 COMPONENT VIDEO S-VIDEO VIDEO
Using the buttons ▲/▼ adjusts the time to count down to automatically turn the projector off.
Long (max. 99 minutes) Short (min. 0 minute = DISABLE)
AUTO OFF | AUTO OFF |
ENABLE | DISABLE |
1 | 0 |
When the time is set to 0, the projector is not turned off automatically. When the time is set to 1 to 99, and when the passed time with no- signal or an unsuitable signal reaches at the set time, the projector lamp will go off and the power indicator begins blinking. Please refer to the section “Turning off the power” (16).
The lamp time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the lamp. Pressing the RESET button on the remote control or the button ► of the projector displays a dialog. To reset the lamp time, select the RESET using the button ▲.
RESET CANCEL
•Please reset the lamp time only when you have replaced the lamp, for a corresponding message about the lamp.
•For the lamp replacement, see the section "Lamp" (38, 39).
The fi lter time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the air fi lter.
Pressing the RESET button on the remote control or the button ► of the projector displays a dialog. To reset the fi lter time, select the RESET using the button ▲.
RESET CANCEL
•Please reset the fi lter time only when you have cleaned or replaced the air fi lter, for a corresponding message about the air fi lter.
•For the air fi lter cleaning, see the section "Air fi lter" (40).
36
