Regarding the Indicator Lamps

Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the Table below. Please respond in accordance with the instructions within the Table.

POWER

LAMP

TEMP

Description

indicator

indicator

indicator

 

 

 

 

 

The orange

Turned OFF

Turned OFF

The STANDBY mode is set

lamp is lighted

(Not lighted)

(Not lighted)

 

 

 

 

 

Flashing of the green lamp

Turned OFF

Turned OFF

The unit is warming up. Please wait.

 

 

 

 

The green lamp is lighted

Turned OFF

Turned OFF

The unit is in an ON state. Ordinary operations may be performed.

 

 

 

 

Flashing of the orange lamp

Turned OFF

Turned OFF

The unit is cooling down. Please wait.

 

 

 

 

 

 

 

The unit is cooling down. Please wait.

Blinking of the

-

-

A certain error has been detected. Wait until the POWER indicator lamp has finished

red lamp

flashing, and then perform the proper response measure using the item descriptions

 

 

 

 

 

below as reference.

 

 

 

 

 

 

 

The lamp does not light.

The red lamp

The red lamp

Turned

There is a possibility that the interior portion has become heated. Turn the power OFF and wait

is lighted, or

approximately 20 minutes. After the main unit has cooled down, please confirm whether or not

is lighted

OFF

there is blockage of the air passage aperture, whether or not the filter is dirty, and/or whether or

blinks

 

 

not the peripheral temperature exceeds 35°C, etc. After performing any needed maintenance,

 

 

 

turn the power ON again; if the same display is displayed, then please change the lamp.

 

 

 

 

The red lamp

 

 

Either there is no lamp and/or lamp cover, or either of these has not been properly fixed

Blinking of the

Turned

(attached). Turn the power OFF and wait approximately 45 minutes. After the main unit has

is lighted, or

sufficiently cooled down, please make confirmation of the attachment state of the lamp and

red lamp

OFF

blinks

lamp cover. After performing any needed maintenance, turn the power ON again; if the same

 

 

 

 

 

display is displayed, then please contact a sales store or a service company.

 

 

 

 

The red lamp

Turned

Blinking of the

The cooling fan is not operating. Turn the power OFF and wait approximately 20 minutes. After the

is lighted, or

main unit has cooled down, please make confirmation that no foreign matter has become caught in

OFF

red lamp

the fan, etc. After performing any needed maintenance, turn the power ON again; if the same display

blinks

 

 

is displayed, then please contact a sales store or a service company.

 

 

 

 

 

 

 

There is a possibility that the interior portion has become heated. Turn the power OFF and wait

The red lamp is

Turned

The red lamp is

approximately 20 minutes. After the main unit has cooled down, please confirm whether or not

lighted, or

there is blockage of the air passage aperture, whether or not the filter is dirty, and/or whether or

OFF

lighted

not the peripheral temperature exceeds 35°C, etc. After performing any needed maintenance,

blinks

 

 

turn the power ON again; if the same display is displayed, then please contact a sales store or a

 

 

 

service company.

The green lamp

Alternative blinking

There is a possibility that the interior portion has become overcooled. Please use the unit within

the usage temperature parameters (0°C to 35°C). After performing any needed maintenance,

is lighted

with the red lamp

turn the power ON again; if the same display is displayed, then please contact a sales store or a

 

 

 

service company.

The green

Simultaneous blinking

This is a notification that it is time to clean the filter.

After cleaning the filter, operate the FILTER TIME portion of the OPTION Menu, and perform

lamp is lighted

with the red lamp

reset of the FILTER TIME.

 

 

 

 

 

 

 

NOTE

When the interior portion has become overheated, for safety purposes, the power source is automatically turned OFF, and the indicator lamps may also be turned OFF. Press the “ ” (power OFF) side of the main power switch, and wait for approximately 20 minutes. Please then use the unit only after having first confirmed that the unit has sufficiently cooled down.

9

Page 10
Image 10
Hitachi CP-X880 user manual Regarding the Indicator Lamps, Power Lamp Temp

CP-X880 specifications

The Hitachi CP-X880 is a highly regarded projector known for its impressive performance and versatility, catering to both educational and corporate environments. Designed with a focus on delivering high-quality images and ease of use, the CP-X880 stands as a reliable choice for presentations, lectures, and training sessions.

One of the main features of the CP-X880 is its native XGA resolution (1024 x 768), which ensures sharp and vivid images, making it ideal for detailed presentations. With a brightness of 3,500 ANSI lumens, this projector can effectively project images in well-lit rooms, reducing concerns about ambient light interfering with visibility. Its high contrast ratio of 2000:1 enhances image depth and ensures that text remains crisp and readable.

The CP-X880 employs advanced technologies such as DLP (Digital Light Processing), which ensures smooth video playback and minimal motion blur, making it suitable for dynamic content. The use of Color Management technology further enhances the projector's color accuracy, allowing for vibrant and true-to-life color reproduction. This characteristic is particularly beneficial for presentations that require displaying graphics or images with precise color fidelity.

Portability is another significant attribute of the Hitachi CP-X880. Weighing around 5.5 kg, it is relatively lightweight compared to other projectors in its category, facilitating easy transport between locations. Additionally, it features comprehensive connectivity options, including HDMI, RGB, and composite inputs. This flexibility allows users to connect various devices, such as laptops, DVD players, and document cameras, without hassle.

The CP-X880 also includes a built-in 10-watt speaker, which provides adequate sound amplification for small to medium-sized rooms. This feature eliminates the need for external speakers in many situations, streamlining setup and reducing equipment clutter.

User-friendly operations are emphasized in the design of the CP-X880, equipped with an intuitive menu system and remote control functionality that simplifies navigation. It also has features such as automatic keystone correction and a quick start-up time, enhancing efficiency during presentations.

In summary, the Hitachi CP-X880 is a robust projector that combines high brightness, excellent resolution, and versatile connectivity options. Its reliability and user-friendly design make it a valuable asset for educators and business professionals seeking impactful visual communication solutions.