OPERATIONS (continued)
No Signal Menu
The same adjustments and settings are available with the Image and Options menus when the MENU button is pressed during display of the “NO INPUT IS DETECTED ON ***” or “SYNC IS OUT OF RANGE ON ***” message while no signal is received.
Table 8. No Signal Menu
VOLUME
BLANK
START UP
MIRROR 
MENU COLOR 
LANGUAGE 
AUTO OFF 
SYNC ON G 
WHISPER
16
Item | Description |
Volume Adjustment: Reduce VOLUME 
↔ Increase VOLUME
•When this function is used, audio input is automatically switched to video. The
VOLUME | audio input can be switched by moving the DISK PAD left and right during the | |||
| display of the volume adjustment bar. The volume adjustment bar is displayed by | |||
| pressing VOLUME | or VOLUME | button. | |
|
| |||
| Select Blank Screen: Select the screen in case of the BLANK mode with the | |||
| / button.The selected one (MyScreen, ORIGIAL or one colors) is displayed | |||
| when the BLANK mode is ON. |
| ||
BLANK | MyScreen is a mode that the | |||
the blue screen at the factory setting. Refer to the description of MyScreen below. | ||||
| ||||
| ORIGINAL is a mode that the factory fixed screen is displayed. | |||
•When MyScreen or ORIGIAL is selected, the screen is going to the black after several minutes.
Select Start Up Screen:Select the screen in case of no signal input with the 
/ 
button. The selected one (MyScreen, ORIGIAL or TURN OFF) is displayed when no signal is input
MyScreen is a mode that the
START UP the blue screen at the factory setting. Refer to the description of MyScreen below. ORIGINAL is a mode that the factory fixed screen is displayed.
TURN OFF displays the blue screen.
•When MyScreen or ORIGIAL is selected, the screen is going to the black after several minutes.
MIRROR | Operation Start/Stop: Press the | / | button. |
|
|
| |
Select Mirror Status: Select the mirror status with the and | buttons. | ||||||
| |||||||
|
|
|
| ||||
MENU COLOR | Select Menu Background Color: Select the color with the | and | buttons. | ||||
|
|
|
|
|
|
| |
LANGUAGE | Operation Start/Stop: Press the | / | button. |
|
|
| |
Select Menu Display Language: Select the language with the | and | buttons. | |||||
| |||||||
|
|
|
|
|
|
| |
| Operation start/stop: Press the | / | button. |
|
|
| |
| Set AUTO OFF: Set 1~99 minutes with the and | buttons. The system | |||||
AUTO OFF | automatically enters the standby mode when a signal is not received for the set | ||||||
time. |
|
|
|
|
| ||
| Clear AUTO OFF: Select the STOP (0 min.) with the | button. When the STOP | |||||
| is selected the system does not enter the standby mode even if no signal is | ||||||
| received. |
|
|
|
|
| |
|
|
|
|
|
|
| |
| Operation Start/Stop: Press the | / | button. |
|
|
| |
| SYNC ON G Valid: Select the TURN ON with the | button. |
|
| |||
SYNC ON G | SYNC ON G Invalid: Select the TURN OFF with the | button. |
| ||||
• May not be displayed correctly with some input signals when the SYNC ON G is | |||||||
| |||||||
| valid. In such cases, remove the signal connector so that no signal is received, | ||||||
| set the SYNC ON G to invalid, and reconnect the signal. |
|
| ||||
Set / Crear WHISPER Mode: Press the 
/ 
button. When the WHISPER is
WHISPER selected, the WHISPER mode is active. In the WHISPER mode, acoustic noise level from the unit is reduced, and brightness level on screen is a little lower.
