English
13

ASSEMBLY AND OPERATION

APPLICATIONS

䡬Cutting metal and stainless steel pipe.
䡬Cutting various lumber.
䡬Cutting mild steel, aluminum and copper plate.
䡬Cutting synthetic resins, such as phenol resin and vinyl chloride.

REMOVAL AND INSTALLATION METHOD OF BATTERY

CAUTION: Be sure to keep the switch turned off and the lock-off button moved to right
position (lock position). (See Fig. 19)

1. Battery removal

Hold the handle tightly and push the battery latch to remove the battery (see Fig. 3
and 4).

2. Battery installation

Insert the battery aligning both guide rail of battery and body. Make sure the battery is
fixed firmly. (See Fig. 4)

CHARGING METHOD

NOTE: Before plugging into the receptacle, make sure the following points.
䡬The power source voltage is stated on the nameplate.
䡬The cord is not damaged.
WARNING: Do not charge at voltage higher than indicated on the nameplate.
If charged at voltage higher than indicated on the nameplate, the
charger will burn out.
Rechargeable battery
Latch Guide rail of batery
Fig. 3
Handle
Pull out Insert
Guide rail of body
Fig. 4