Hitachi CV-90CY manual ON-OFFSWITCH Fig, CORD STORAGE AND RELEASE Fig, HANDLE POSITION Fig

ON-OFF SWITCH (Fig. 3)

Turn cleaner on or off by pushing downward on the power switch 3

CORD STORAGE AND RELEASE (Fig. 4)

1.To store the cord, turn the upper cord storage hook 4 to the upward position, and wrap the cord around the hooks.

2.To release the power cord, turn the upper cord storage hook 4 downward, then pull off the complete cord.

3.To help secure the cord during use, fix it on the upper cord storage hook 5

Fig.3

5

4

Fig.4

HANDLE POSITION (Fig. 5)

To change the position of the handle, first press with foot on the handle release pedal at the rear of the cleaner, and then lower the handle.

(A)Upright position: When the handle is in this position the rotary brush is automatically raised away from the floor.

(B)Normal working position: This position allows you to raise the front of the nozzle head to clear steps.

(C) Low position: For reaching under low furniture to raise the front of the nozzle head to clear steps.

Fig.5

NOTE: The handle should always be in upright position when cleaning tools are used.

-2-

CV_90CY.p65 3 6/28/04, 3:23 PM