Hitachi CV-90CY manual HOW TO USE TOOLS Fig

HOW TO USE TOOLS (Fig. 10, 11, 12)

Use the tools you require for cleaning hard floors, fabrics and curtains etc.

1.	Ensure the cleaner is in the upright position.
2.	Hold the dusting brush 8 and the extension pipe 9 as
	shown in Fig.10, and disconnect the dusting brush from
	the extension pipe.
3. Turn the hose storage hook 0 counter clockwise, and
	remove the flexible hose A from the back of the cleaner.
4. When use the extension pipes, remove them from the
	back of the cleaner. The extension pipe assembly

8A

consists of two pipes-with one located inside the other for

storage.

5. The tools can be connected as shown in Fig.12.

NOTE: After having finished using the tools, re-insert the tools and restore the flexible hose on body.

NOTE: The extension pipes should be re-inserted as shown in Fig.10.

9

0

NOTE: Rotary brush is not disconnected when tools are in use and care should be taken not to run over the mains lead.

Fig.10

Curved joint pipe

Using the dusting brush Using the crevice nozzle

Fig.11

Extension pipes

Dusting brush

Crevice nozzle

Fig.12

-4-

CV_90CY.p65 5 6/28/04, 3:23 PM