English

7. Mounting and dismounting of the bit

For keyed chuck (Fig. 2)

(1)Open the chuck jaws, and insert the bit into the chuck.

(2)Place the chuck wrench in each of the three holes in the chuck, and turn it in the clockwise direction (viewed from the front side). Tighten securely.

(3)To remove the bit, place the chuck wrench into one of the holes in the chuck and turn it in the counterclockwise direction.

For keyless chuck (Fig. 3)

(1)Open the chuck jaws, and insert the bit into the chuck.

To open the chuck jaws, hold the ring while turning the sleeve in the counterclockwise direction (viewed from the front side).

(2)Firmly grasp the ring and turn the sleeve in the clockwise direction. Tighten securely.

(3)To remove the bit, firmly grasp the ring and turn the sleeve in the counterclockwise direction.

(4)If it is hard to loosen the sleeve, fix the spindle using the open-end wrench, hold the sleeve firmly, and turn it in the loosening direction (counterclockwise when viewed from the front). (Fig. 4)

8.Installing the side handle For D10VG and D13VF

A Side handle is supplied with drill.

It can be installed on either side of the tool for right or left handed use.

To install the side handle, thread it into the socket on the desired side of the tool and tighten it securely. (Fig. 5)

For D13VG

The large torque of the motor for this drill can result in considerable reaction to your arms during drilling work. Accordingly, make absolutely sure before use that the side handle and the handle joint are completely installed. (Fig. 6)

9.Check the rotational direction (Fig. 7)

The bit rotates clockwise (viewed from the rear side) by pushing the R-side of the push button.

Drill chuck

Chuck

Tighten

Loosen

Wrench

 

 

Fig. 2

Ring

Sleeve

Loosen

Tighten

Fig. 3

Loosen

Open End

Wrench

Fig. 4

Side Handle

LoosenTighten

Fig. 5

Handle

Joint

Loosen

Tighten

Side

Handle

 

 

 

Loosen

Tighten

Fig. 6

12