Hitachi DH24PB2 HOW to USE the Core BIT for Light Load, Using depth gauge Fig, Mounting

6. Using depth gauge (Fig. 12)

(1)Loosen the knob on the side handle, and insert the depth gauge into the mounting hole on the side handle.

(2)Adjust the depth gauge position ac- cording to the depth of the hole and tighten the knob bolt securely.

7.How to use the drill bit (taper shank) and the taper shank adaptor.

English

Mounting Hole

Depth Gauge

Knob on Side

Handle

Fig. 12

(1)	Mount the taper shank adaptor to the
	rotary hammer. (Fig. 13)
(2)	Mount the drill bit (taper shank) to the

Drill Bit

Grip

	taper shank adaptor. (Fig. 13)
(3)	Turn the switch ON, and drill a hole in
	prescribed depth.
(4)	To remove the drill bit (taper shank),
	insert the cotter into the slot of the taper
	shank adaptor and strike the head of
	the cotter with a hammer supporting
	on the rests. (Fig. 14)

Taper shank

Adaptor Front Cap

Fig. 13

Cotter Taper Snank Adaptor

Rests

Fig. 14

HOW TO USE THE CORE BIT (FOR LIGHT LOAD)

When boring penetrating large hole use the core bit (for light load). At that time use with the center pin and the core bit shank provided as optional accessories.

1. Mounting

CAUTION:

◯Be sure to turn power OFF and disconnect the plug from the receptacle.

15