(1)Switching to “hammering”
(a)Push the button, release lock and turn the selector lever counterclockwise.
(b)Align ▲ of the selector lever and 
of the lever holder as illustrated in Fig. 7.
(c)Release the button to lock the selector lever.
NOTE:
Turn the selector lever (do not push the button) to check if it is completely locked and make sure that it does not turn.
(2)When fixing working positions of tools such as cold chisel, etc.,
(a)Push the button, release lock and turn the selector lever.
Align ▲ of the selector lever and 
of the lever holder as illustrated in Fig. 8.
(b)Release the button to lock the selector lever.
(c)Turn the grip as illustrated in Fig. 9 and fix the tool to the desired working direction.
(d)Switch the selector lever to “hammering” according to the procedures mentioned in the above item (1) and secure the position of the tool.
5. Install the stopper (Fig. 10)
(1)Loosen the side handle and insert the straight portion of the stopper into the handle bolt hole from the front cover.
(2)Loosen the side handle, move the stopper to the specified position and rotate the grip of the side handle clockwise to fix the stopper.
English
Selector Lever Lever Holder
Button
Fig. 7
Button Lever Holder
Selector Lever
Fig. 8
Grip
Fig. 9
Stopper
Side Handle
Fig. 10
13
