HOOKUPS
DESCRIPTION-REAR PANEL
DIGITAL |
|
|
|
| ANALOG | COMPONENT | ||||||||||||||||||
AUDIO OUT |
|
|
|
| AUDIO OUT | VIDEO OUT | OUT | |||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| Y |
|
|
|
| CR/PR |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| I | P |
OPTICAL COAXIAL | R | L | VIDEO | CB/PB | PROGRESSIVE | |
|
|
| OUT |
|
|
|
1 | 2 | 3 | 4 | 5 | 6 |
1.DIGITAL AUDIO OUT JACKS:
Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiber. Use to connect to a Dolby Digital decoder or DTS decoder.
2.ANALOG AUDIO OUT JACKS
Connect to the Audio input jacks of
3.VIDEO OUT JACK
Use a video cable to connect one of the jack to Video input on your
4.COMPONENT VIDEO OUT JACKS
Use these jacks if you have a TV with Component Video in jacks. These jacks provide CR/PR, CB/PB and Y video. Along with
5.
Use the
6.PROGRESSIVE switch
Selecting Progressive Scan (480p or Interlaced 480i) Playback
¡If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output jacks of the DVD player and set the Progressive switch on the back of the DVD player to “P” . Next, set your TV to the progressive scan mode.
If your TV is not compatible with progressive scan, keep the Progressive switch to “I” .
¡Use a commercially available adaptor if your TV s or monitor s video input jacks are of the BNC type.
What is Progressive Scanning?
¡Unlike conventional interlace scanning, the progressive scan system provides less flickering andimages in higher resolution than that of traditional (480i) television signals.
The DCDi (Directional Correlational
Manufactured under license from Dolby Laboratories. “Dolby” and the
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
– 12 – | EN |
1L01