Hitachi DZ-GX5100SW, DZ-GX5060SW Turning DVD Video Camera/Recorder On and Off, Set to OFF

English

Turning DVD Video Camera/Recorder On and Off

While holding down the grey button at the right of power switch, set the switch according to each recording function:

Set to “OFF”:

The DVD video camera/ recorder will turn off

Set to “"”:

To record still on SD memory card

Set to “!”:

To record movie on DVD- RAM/DVD-RW/DVD-R/ +RW disc

Note:

•Once you turn the DVD video camera/recorder on to let it recognise the disc, you can immediately record or play back by turning the DVD video camera/ recorder on again. However, if a long time has elapsed after the disc was inserted, it will take some time for the DVD video camera/recorder to start because it must recognise the disc again (see “Troubleshooting” on page 137).

•It will take some time for the DVD video camera/ recorder to display the Disc Navigation screen after power is turned on.

•When the DVD video camera/recorder is turned on, the self-diagnosis function will work and a message may appear. In this case, refer to “Trouble Messages” on page 131 and take corrective action.

Set to “ ”:

To record still on DVD-

RAM disc

Power ON status

During playback, set the power switch to “!” or “ ” when using disc, or set it to “"” when using card.

Turn the switch while holding down the grey button at the right of switch.

Power switch

30