English
SPECIFICATIONS
Model |
| EC119 | |||
|
|
|
|
| |
Motor |
| ||||
|
|
|
|
| |
Power Source |
| ||||
|
|
|
|
| |
Output Power |
| 2 HP | |||
| (1.5 KW) | ||||
|
|
|
| ||
|
|
|
|
| |
Current |
| 15.0 A | |||
|
|
|
|
| |
Tank Capacity |
| 4 gal. | |||
| (15.1 ltr) | ||||
|
|
|
| ||
|
|
|
|
| |
Maximum Pressure | 125 PSI | ||||
(8.6 bar) | |||||
|
|
|
| ||
|
|
|
|
| |
|
|
| at 40 PSI | 5.3 CFM | |
|
|
| (2.8 bar) | (150 ltr/min) | |
Free Air |
|
|
| ||
|
| at 90 PSI | 4.4 CFM | ||
Delivery |
|
| |||
| (6.2 bar) | (125 ltr/min) | |||
|
|
| |||
|
|
|
|
| |
|
|
| at 100 PSI | 4.0 CFM | |
|
|
| (6.9 bar) | (113 ltr/min) | |
|
|
|
|
| |
Lubrication |
| Oil | |||
|
|
|
|
| |
ACCESSORY
WARNING:Accessory other than these shown below can lead to malfunction and
resulting injuries.
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms to the power source requirements specified on the product nameplate.
STANDARD ACCESSORY
Dipstick - - - - - - - - - - - - - - 1
APPLICATIONS
◯Air source of the pneumatic nailer and stapler.
WARNING: Never use compressor for
applications other than compressor
for pneumatic nailer and stapler.
2. Power switch
Ensure that the knob of the pressure switch is in the “OFF” position (Fig. 2). If the plug is connected to a receptacle while the knob is in the “ON” position, the compressor will start operating immediately and can cause serious injury.
Knob of the pressure switch
Fig. 2
3. Extension cord
When the work area is far away from the power source, use an extension cord of sufficient thickness and rated capacity (refer page 7). The extension cord should be kept as short as practicable.
WARNING: Damaged cord must be replaced or repaired.
— 10 —
