Hitachi ED-A110 user manual Input Menu, Progressive, Video NR, Color Space

INPUT Menu

INPUT Menu

From the INPUT Menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.

Item

Description

	Using the ▲/▼ buttons switches the progress mode.
	TV ó FILM ó TURN OFF
	• This function is performed only for an interlaced signal at the
PROGRESSIVE	VIDEO or S-VIDEO input, and for 525i (480i) or 625i(576i) signal at
	the COMPONENT VIDEO input.
	• When TV or FILM is selected, the screen image will be sharp.
	FILM adapts to the 2-3 Pull-Down conversion system. But these
	may cause a certain defect (for example, jagged line) of the picture
	for a quick moving object. In such a case, please select TURN OFF,
	even though the screen image may lose the sharpness.
	Using the ▲/▼ buttons switches the noise reduction mode.
	HIGH ó MID ó LOW
VIDEO NR	• This function is performed only for the VIDEO or S-VIDEO input,
	and for 525i (480i) or 625i(576i) signal at the COMPONENT VIDEO
	input.
	• When this function is excessive, it may cause a certain
	degradation of the picture.

	Using the ▲/▼ buttons switches the mode for color space.
	AUTO ó RGB ó SMPTE240 ó REC709 ó REC601
COLOR SPACE	• This item can be selected only for a computer signal or component
	video signal except SCART RGB signal.

•The AUTO mode automatically selects the optimum mode.

•The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO.

Using the ▲/▼ buttons switches the function of the COMPONENT (Y, CB/PB, CR/PR) port.

COMPONENT ó SCART RGB

COMPONENT When the SCART RGB is selected, COMPONENT (Y, CB/PB, CR/ PR) and VIDEO ports will function as a SCART RGB port. A SCART cable is required for a SCART RGB input to the projector. For your reference, see the TECHNICAL part.

(continued on next page)

33