Hitachi ED-A111 user manual

INPUT menu

INPUT menu

From the INPUT menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.

Item

Description

	Using the ▲/▼ buttons switches the progress mode.
	TV ó FILM ó TURN OFF
	• This function is performed only for an interlaced signal at the
PROGRESSIVE	VIDEO or S-VIDEO input, and for 480i@60 or 576i@50 signal at
	the COMPONENT VIDEO input.
	• When TV or FILM is selected, the screen image will be sharp.
	FILM adapts to the 2-3 Pull-Down conversion system. But these
	may cause a certain defect (for example, jagged line) of the picture
	for a quick moving object. In such a case, please select TURN OFF,
	even though the screen image may lose the sharpness.
	Using the ▲/▼ buttons switches the noise reduction mode.
	HIGH ó MID ó LOW
VIDEO NR	• This function is performed only for the VIDEO or S-VIDEO input,
	and for 480i@60 or 576i@50 signal at the COMPONENT VIDEO
	input.
	• When this function is excessive, it may cause a certain
	degradation of the picture.

	Using the ▲/▼ buttons switches the mode for color space.
	AUTO ó RGB ó SMPTE240 ó REC709 ó REC601
COLOR SPACE	• This item can be selected only for a computer signal or component
	video signal except SCART RGB signal.

•The AUTO mode automatically selects the optimum mode.

•The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO.

Using the ▲/▼ buttons switches the function of the COMPONENT (Y, CB/PB, CR/PR) port.

COMPONENT ó SCART RGB

COMPONENT When the SCART RGB is selected, COMPONENT (Y, CB/PB, CR/ PR) and VIDEO ports will function as a SCART RGB port. A SCART cable is required for a SCART RGB input to the projector. For your reference, see the TECHNICAL part.

(continued on next page)

33