Hitachi ED-AW110N user manual First of all, Entries and graphical symbols explanation

First of all

Entries and graphical symbols explanation

The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them.

WARNING This entry warns of a risk of serious personal injury or even death.

CAUTION This entry warns of a risk of personal injury or physical damage.

NOTICE This entry notices of fear of causing trouble.

Important safety instruction

7KHIROORZLQJVDUHLPSRUWDQWLQVWUXFWLRQVIRUVDIHO\XVLQJWKHSURGXFW%HVXUHWR follow them always when handling the product. The manufacturer assumes no responsibility for any damage caused by mishandling that is beyond normal usage GH¿QHGLQWKHVHPDQXDOVRIWKLVSURMHFWRU

WARNING ŹNever use the product in or after an abnormality (ex. giving off smoke, smelling strange, took a liquid or an object inside, broken, etc.). If an abnormality should occur, unplug the projector urgently.

ŹSituate the product away from children and pets.

ŹDo not use the product when there is fear of a thunderbolt.

ŹUnplug the projector from the power outlet if the projector is not used for the time being.

ŹDo not open or remove any portion of the product, unless the manuals direct LW)RULQWHUQDOPDLQWHQDQFHOHDYHLWWR\RXUGHDOHURUWKHLUVHUYLFHSHUVRQQHO Ź8VHRQO\WKHDFFHVVRULHVVSHFL¿HGRUUHFRPPHQGHGE\WKHPDQXIDFWXUHU ŹModify neither the projector nor accessories.

ŹLet neither any things nor any liquids enter to the inside of the product. ŹDo not wet the product.

ŹApply neither a shock nor pressure to this product.

-Do not place the product on an unstable place such as the uneven surface or the leaned table.

-Do not place the product unstably. Place the projector so that it does not protrude from the surface where the projector is placed on.

-Remove all the attachments including the power cord and cables, from the

projector when carrying the projector.

ŹDo not look into the lens and the openings on the projector, while the lamp is on.

ŹDo not approach the lamp cover and the exhaust vents, while the projection lamp is on. Also after the lamp goes out, do not approach them for a while, since too hot.

2