English
ASSEMBLY AND OPERATION
APPLICATIONS
Finishing of dies for press working, die casting and moulding.
Finishing of thread cutting dies, tools and other small parts.
Internal grinding of tools and machine parts.
WARNING: To avoid the risk of serious injury, NEVER use this grinder with abrasive wheels,
PRIOR TO OPERATION
1.Power source
Ensure that the power source to be utilized conforms to the power source requirements specified on the product nameplate.
2.Power switch
Ensure that the switch is in the OFF position. If the plug is connected to a receptacle while the switch is in the ON position, the power tool will start operating immediately and can cause serious injury.
3.Extension cord
When the work area is far away from the power source, use an extension cord of sufficient thickness and rated capacity. The extension cord should be kept as short as practicable.
WARNING:
Damaged cord must be replaced or repaired.
4.Check the receptacle
If the receptacle only loosely accepts the plug, the receptacle must be repaired. Contact a licensed electrician to make appropriate repairs.
If such a faulty receptacle is used, it may cause overheating, resulting in a serious hazard.
5.Check the work site and surrounding area
Be sure that the work area has been thoroughly checked and prepared to avoid any unsafe conditions. Review the SAFETY section of this manual.
10