Connection Instructions
COMPONENT(If connected to S-VIDEO,select the S-VIDEO external
inputsource.)
3.Refer to the DVD player's manual for operating instructions.
Toget better picture quality,connect a DVD player to the component
inputports as shown below.
ComponentInput ports
S-VIDEOInput
Connectionand use steps:
1.Readthe user guide supplied with your AV devices and ensure that it has
S-Videoconnectors;
2.Makesure that the power of the LCD-TV and the AV device are switched off;
.Turnon the power of the LCD-TV first ;
andthen turn on the power of the AV
device;
4.Pressthe buttonto set the video
inputmode of the LCD-TV to S-VIDEO
mode.
SOURCE
ConnectionOption 1
SetVCR output switch to 3 or 4 and then
tuneTV to the same channel number.
ConnectionOption 2
1.Connect the audio and S-VIDEO cables
fromthe VCR's output jacks to the TV
inputjacks, as shown in the figure.
2.Insert a video tape into the VCR and
pressPLAY on the VCR. (Refer to the
VCRowner smanual.)
3
-To avoid picture noise (interference), leave an adequate distance between the
VCRand TV
.
VCR
1
2