TROUBLESHOOTING (continued)
Symptom and Check List (continued)
Symptoms |
| Check list |
| Page | ||
|
|
|
|
| ||
● No picture – normal sound | ● | Check the value level of “Brightness” and “Contrast” in “Picture | 27 |
| ||
| Menu”. |
|
| |||
|
|
|
|
| ||
|
|
|
|
| ||
| ● Check if the batteries are installed correctly. |
|
|
| ||
● The remote control does not | ● | The batteries might be exhausted. Replace them with new ones. | 11 , | 12 | ||
● | Remove all the obstructions in front of the sensor window on the | |||||
work. | ||||||
| unit. |
|
|
| ||
|
|
|
|
| ||
| ● Check if the buttons of the control panel can work. |
|
|
| ||
● Normal picture but no | ● | Check the connection of the external equipment. |
| 14 ~ 19 | ||
|
|
| ||||
● | Check the “Color” in “Picture Menu”. |
| 27 , | 28 | ||
|
| |||||
● Image is paused. | ● Check if the TV is in freeze mode by pressing | button. | 38 |
| ||
|
|
|
|
|
| |
● No picture | ● | Check if the Power Cord is plugged into the socket firmly. | 10 |
| ||
|
| |||||
The Indicating lamp → Off | ● | Check if the Main Power is ON. |
| 14 , | 19 | |
|
| |||||
| ● Check if all the cables of the external equipment are connected |
|
| |||
● No picture |
| correctly and firmly. |
|
|
| |
● | Check if the power of the external equipment is ON. |
|
| |||
The Indicating lamp → Orange |
|
| ||||
● | Check if the TV/AV mode has been selected correctly. | 38 |
| |||
It means that the unit is in |
| |||||
● | Check if the PC is in Power Save mode or not. |
|
|
| ||
“Power Save Mode”. |
|
|
| |||
● Refer to “Power Save mode” and “When following messages |
|
| ||||
|
|
| ||||
|
| appears on the screen” |
|
|
| |
|
|
|
| |||
● No picture | ● Check if the signal cable is connected correctly and firmly. | 14 ~ 18 | ||||
The indicating lamp → Green | ● | Adjust the level of Brightness and Contrast lower. |
| |||
|
|
| ||||
|
|
|
|
| ||
● The top of the television and | ● | It may happen when you use the unit for long hours. Turn off the |
|
| ||
| Main Power of the unit for a while. Please note that this is not all | 19 |
| |||
surface of the panel heat up. |
|
| ||||
| function. |
|
|
| ||
|
|
|
|
| ||
● Image cannot be displayed in | ● Press Recall button to check if the input signal of the displayed | 21 , | 42 | |||
the correct position. |
| image is compatible with the specification of the television. | ||||
|
|
| ||||
|
|
|
|
|
| |
● When the VCR is in special | ● | It could happen when the VCR is connected to Component output, |
|
| ||
playback features (Fast forward |
|
| ||||
| such as 480i. This is not malfunction. |
|
|
| ||
or Rewind), the screen gets |
|
|
|
| ||
● | Try Composite output or |
|
| |||
dark and cannot see the image |
|
| ||||
| again. |
|
|
| ||
at all. |
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ||
● Some screen display size | ● | Check the signal status by pressing the button on the remote | 21 |
| ||
| control. The available screen display size is different depending on |
|
| |||
cannot be switched. |
| 36 , | 37 | |||
| the current signal status. |
| ||||
|
|
| ||||
| ● Check if the cables are connected correctly. |
| 16 |
| ||
● Cannot be displayed the image | ● Check the output format of the equipment. |
|
| |||
from HDMI | ● (Please refer to “Connecting Procedure” and “Recommended Signal | 44 ~ 45 | ||||
|
| List”.) |
|
|
| |
● The image and audio are | ● | Check if the PC (RGB)/HDMI analog audio input terminal is | 16 , | 17 | ||
mismatched when in RGB or | ||||||
| connected to the same external device. |
| ||||
HDMI mode. |
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
|
|
40