Checking the digital signal strength
This TV will allow you to view the digital signal meter for digital channels.
1 Select “Channel”, then press ▶ or ENTER.
2 Press ▲ or ▼ to select “Signal Meter”.
3 Press ▶ or ENTER to check the digital signal strength. The digital signal strength screen will appear.
If necessary, adjust the direction of the antenna to obtain the maximum signal strength.
CH Signal Meter
0 | 50 | 100 |
Signal Level
NOTE:
• Signal meter feature is not available for analog channels.
• After 240 seconds, the Signal Meter screen will clear and the TV will return to normal viewing automatically.
Labeling channels
Channel label appears with the channel number display each time you turn on the TV, select a channel, or press DISPLAY. You can choose any four characters to identify a channel.
To create channel labels
1 Select “Channel”, then press ▶ or ENTER.
2 Press ▲ or ▼ to select “Channel Labels”, then press ▶ or
ENTER.
The Channel Labels menu will appear.
3 Press ◀ or ▶ to select a channel you want to label, then press ▼.
CH Channel Labels
|
|
|
|
| Channel Number |
| |
| Channel Label |
|
|
| Label Clear | >> |
|
|
|
|
|
| :Move | :Adjust | |
Press ◀ or ▶ repeatedly until the character you want appears | |||||||
4 in the first space. | |||||||
|
| Channel Labels |
|
|
| ||
| CH |
|
|
| |||
|
|
|
|
| |||
|
| Channel Number |
| ||||
|
| Channel Label |
|
|
| ||
|
| Label Clear |
| >> |
| ||
|
|
| :Move | :Adjust | ENTER :Select | ||
The characters rotation as follows:
SPACE
If the character which you desire appears, press ENTER. Repeat this step to enter the rest of the characters.
If you would like a blank space in the label name, you must choose the empty space from the list of characters.
5 Repeat steps
6 When you finish inputting the label name, press EXIT to return to the normal screen.
To clear a Channel Label
After step 3 above, press ▲ or ▼ to select “Label Clear”, then press ▶ or ENTER.
NOTE:
• The channel labels will be reset after “Scan” on page 16.
Labeling video inputs
The Video Label feature allows you to label each input source for your TV.
1 Select “Setup”, then press ▶ or ENTER.
2 Press ▲ or ▼ to select “Video Label”, then press ▶ or ENTER. 3 Press ▲ or ▼ to select an input which you want to label.
4 Press ◀ or ▶ to select the desired label for that input source.
Video Label
Video1-
Video2-
Component-
HDMI1-
HDMI2-
HDMI3-
PC-
:Move 
:Adjust
Available video labels:
Setting the Parental Control
An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV” and “Movie” if this data is transmitted. You may set this restriction separately. To use the Parental Control function, you must register a password.
To register a password
1 Select “Locks”, then press ▶ or ENTER.
2 Select and enter your password (4 digits) using Number buttons
Locks
New Password | * * *_ |
| ENTER :Select | |
3 | “ ” appears instead of the number. | |
Enter the same password again to confirm, then press | ||
ENTER. |
| |
| The password is now registered. | |
NOTE:
• If you forget the password, contact Customer Service at
Your original remote control will be required.
• To avoid forgetting the password, write it down and keep in a safe place.
ENGLISH
17
