Hitachi L47VP01U manual PC Mode, Installation, Menu System in PC mode

￿￿￿￿￿￿￿￿ ￿￿￿￿￿￿￿￿￿ ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

In source menu, highlight a source by pressing α /	Autoposition
β button and switch to that mode by pressing ‾ or	If you shift the picture horizontally or vertically to an
OK button. Source options are; TV, AV-1, AV-2, AV-2	unwanted position, use this item to put the picture into
S, AV-3, AV-4, AV-5, HDMI1, HDMI2, PC RGB and	correct place automatically.
DTT.	• Select Autoposition item by using α / β buttons.
PC Mode	Press or OK button.
	Warning: Auto position adjustment recommended
Installation
	to be done with the full screen image for
• Power off both computer and display before making	the proper adjustment.
any connections.	H (Horizontal) Position
• Set your PC’s resolution correctly before connect-	This item shifts the image horizontally to right hand
ing to the TV. See the table on Appendix A on page	side or left hand side of the screen.
33.	• Select H Position item by using α / β button.
• Use 15-pin display cable to connect a PC to the LCD
	• Use _ / ‾ button to adjust the value.
TV.
	V (Vertical) Position
Menu System in PC mode
	This item shifts the image vertically towards the top or
Sound Menu/Feature Menu
	bottom of the screen.
The items in these menus are described at Sound &	• Select V Position item by using α / β button.
Feature Menu explained in “Menu System”.
	• Use _ / ‾ button to adjust the value.
PC Picture Menu
	Dot Clock
By pressing α /βbutton, select the second icon. PC
	Dot Clock adjustments correct interference that ap-
Picture menu appears on the screen.
	pear as vertical banding in dot intensive presentations
Brightness, Contrast and Colour Temperature adjust-
	like spreadsheets or paragraphs or text in smaller fonts.
ments in this menu are identical to adjustments de-
	• Use _ / ‾ button to adjust the value.
fined in TV picture menu in “Analogue TV Menu Sys-
tem”.	Phase
PC Picture Position Menu	Depending on the resolution and scan frequency that
By pressing α /β button, select the first icon and	you input to the TV Set, you may see a hazy or noisy
press ‾ or OK button. PC Picture Position menu ap-	picture on the screen. In such a case you can use
pears on the screen.	this item to get a clear picture by trial and error method.
	• Use _ / ‾ button to adjust the value.
	Sound in PC mode
	• Connect the PC’s Audio output to the TV’s PC Audio
	In socket with an audio cable.

Downloaded From TV-Manual.com ManualsEnglish - 24 -