Hitachi P55H4011 Channel Manager, Signal Meter, Auto Channel Scan, Cable 1 or CABLE2 source

Channel Manager

Channel Manager

Select CHANNEL MANAGER to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel List.

1.Press CURSOR PAD , to highlight functions.

2. Press the SELECT button or CURSOR PAD to select.

OR

Video

Audio

Channel Manager

Locks

Timers

Setup

Move SEL Select

Channel Manager

Signal Meter

Auto Channel Scan

Channel List

Move SEL Select

Signal Meter

Select SIGNAL METER when using an indoor or outdoor antenna. This feature will show the signal strength and peak values of the Antenna signal to help you adjust your antenna to optimize signal reception.

Use the CURSOR PADS and the SELECT button to highlight and select CLOSE to exit.

NOTE: The Signal Meter will not be available (grayed

out) when watching analog channels.

Auto Channel Scan

This feature will automatically store active Analog and Digital channels in Auto Channel Scan memory.

1.	Use the CURSOR buttons	or	to highlight AIR,
	CABLE (1) or CABLE(2) source.
2.	Press the CURSOR buttons	or	to highlight the
	START or RESET option.

3. Press the SELECT button to select.

NOTE: 1. If certain channels are poor or not possible in cable(1) mode, set cable source to cable(2) by using the CURSOR buttons or .

OR

O

Channel Manager

Signal Meter

Auto Channel Scan

Channel List

Move SEL Select

Channel Manager

Signal Meter

Channel	3 - 1
Strength	91
Peak	91
SNR	10
	Close
Move	SEL Return

Channel Manager

Signal Meter

Auto Channel Scan

Channel List

Move SEL Select

Channel Manager

Auto Channel Scan

SourceAir

Auto Channel Scan Start Reset

Move SEL Return

On-Screen Display

39