COOLING OPERATION
Use the device for cooling when the outdoor temperature is
If indoor humidity is very high (over 80%), some dew may form on the air outlet grille of the indoor unit.
˚C
RESET
˚C
1 Press the FUNCTION selector so that the display indicates (COOL).
Set the desired FAN SPEED with the 
(FAN SPEED) button (the display indicates the setting).
(AUTO): The FAN SPEED is HI at first and varies to
2 | MED automatically when the preset temperature |
has been reached. | |
(HI) | : Economical as the room will become cool |
| quickly. |
(MED) | : Quiet. |
(LOW) | : More quiet. |
Set the desired room temperature with the TEMPERATURE button (the display indicates the setting).
3 |
| The range of | |
| |||
| room temperature for cooling. | ° | |
|
| If the temperature setting is 27 C, the room | |
|
| temperature will be controlled at around 27°C. | |
|
| ||
The temperature setting and the actual room temperature may vary some how depending on conditions.
Press the 
(START/STOP) button. Cooling operation starts with a beep. Press the button again to stop operation. The START cooling function does not start if the temperature setting is higher than the current room temperature (even though the 
STOP (OPERATION) lamp lights). The cooling function will start as soon as you set the temperature below the current room temperature.
■As the settings are stored in memory in the remote controller, you
only have to press the 
(START/STOP) button next time.
– 10 –
