2.3Graphical User Interface (GUI)
•Filament Image:Displays the Filament Image window.
This button is used to perform appropriate image adjustments using a filament image. Normally this function is not used by customers.
•Image Adjustment: Displays the Image Adjustment window.
|
| This button permits the performance of basic adjustment |
|
| operations, such as focusing and stigma compensation. |
• | ABCC: | Executes automatic brightness and contrast control. |
|
| Refer to <3.5.4 Image Brightness and Contrast |
|
| |
• | Auto Focus: | Executes automatic focusing. |
|
|
•Auto Stigma and Focus: Executes automatic astigmatism correction and focusing. Refer to <3.5.5 Focus and Astigmatism Correction>.
•Assignment Auto Buttons: These buttons assign buttons to the Auto Function area on the Control Panel.
• | Focus Monitor: | Starts Focus Monitor mode. |
|
| |
• | BC Monitor: | Starts BC Monitor mode. |
|
| Refer to <3.5.4 Image Brightness and Contrast |
|
|
•Dynamic Stigma Monitor: Starts up the Dynamic Stigma Monitor.
• DeGauss: | Degausses the objective lens. |
(5)Scan menu: The Scan menu includes commands for scanning control.
• | Run (Freeze): | Runs or freezes scanning alternately. |
• | Capture: | Starts image capture. |
|
| Refer to <3.6.3 Image Capture>. |
•Capture Setup:During the image capture operation, this button can be used to specify an image size (in pixels) and scanning.
•Split DM Mode:Activates Split/Dual Mag mode.
| |
• Scan Speed: | Selects scanning speed. |
| Refer to <3.5.3 Selecting Scanning Speed>. |
•Assignment Speed Buttons: These buttons assign scanning speeds to the scan speed buttons. Twelve speeds can be assigned to four buttons.
2 - 20