2.3.4

• Scan Mode:

Selects the size of scanning image display (Screen

 

mode) from Full, Dual and Small.

 

Refer to <3.9.1 Screen Mode>.

(6)Image menu: The Image menu includes commands for signal processing of optional detectors.

•Opt. Signal Processing: Opens the Opt Signal Processing dialog window. Refer to <3.9.5 Signal Processing>.

•Show Histogram: Displays a histogram of the image being observed.

See <3.5.4 Image Brightness and Contrast Adjustment>.

(7)Analysis menu: The Analysis menu includes commands for analysis modes, measurement and others.

•Normal: Sets to Normal mode (image observation).

•Line Analysis: Selects Line analysis 1 and 2 mode alternately. Refer to <3.9.4 X-ray Analysis Mode>.

•Spot Analysis: Selects Spot 1 and 2 mode alternately.

Refer to <3.9.4 X-ray Analysis Mode>.

•Area Analysis: Selects Area analysis 1 and 2 mode alternately. Refer to <3.9.4 X-ray Analysis Mode>.

•Oblique: Opens Oblique image window and displays bird's-eye view of viewing images.

Refer to <3.9.13 Oblique Image>.

•CD Measurement: If the CD-Measurement option is installed, the CD Measurement dialog window is brought up.

(8)Option menu: The Option menu includes commands for optional functions.

•Optional Setup - Op. Panel Setting: Opens Op. Panel tab of the Optional Setup dialog window.

Use for arrangement of functions on the Operation Panel.

Refer to <3.9.14 Optional Setting>.

•Optional Setup - Stage:Opens Stage tab of the Optional Setup dialog

window.

Use for setting parameters of stage control function. Enabled in Type II.

Refer to <3.9.14 Optional Setting>.

2 - 21